全国服务热线:

18396804865 钱经理

数控火焰切割机生产厂家切割机通常有哪几种

2020-01-17 11:07:06 文章来源:www.jnzrtcsk.com 208

1、数控火焰切割机厂家分享:机械产品零件加工行业,加工厚度一般在3-80mm以下,板材切割幅面一般2200*3200mm之间,这时最好选用大台式数控切割机.并且可实现火焰等离子两用切割功能.
1. In the processing industry of mechanical products and parts, the thickness is generally below 3-80 mm, and the cutting width of sheet metal is generally between 2200*3200 mm. At this time, it is better to choose a large table NC cutting machine, and the flame plasma cutting function can be realized.
2、激光切割行业,该行业切割要求精度高,切割效果好.此时只有采用激光切割机最为合适.当然激光切割机的价格相对较高.
2. Laser cutting industry, which requires high accuracy and good cutting effect. At this time, only laser cutting machine is the most suitable. Of course, the price of laser cutting machine is relatively high.
3、广告行业,该行业薄板切割居多(如:广告字切割、广告工艺品切割、不锈钢切割、镀锌板切割等),切割厚度一般只有0.2-3mm,主要是用等离子切割机进行切割.这时选用广告台式等离子数控切割机最为合适.
3. Advertising industry, the industry thin plate cutting most (such as: advertising word cutting, advertising handicraft cutting, stainless steel cutting, galvanized plate cutting, etc.), cutting thickness is generally only 0.2-3 mm, mainly using plasma cutting machine for cutting. At this time, the use of advertising desktop plasma CNC cutting machine is the most appropriate.
在这三种情况中,前两种价格适中,被大多数人接受,是现在台式切割机主要使用行业.但随着加工技术要求的提高,现在低价位的激光切割机也越来越普及.
In these three cases, the first two are moderately priced and accepted by most people. Now desktop cutting machines are mainly used in industry. However, with the improvement of processing technology requirements, low-cost laser cutting machines are becoming more and more popular.http://www.jnzrtcsk.com/

  济南卓然天成是大型数控火焰切割机厂家,数控等离子切割机厂家,便携式数控切割机厂家www.jnzrtcsk.com,供应河北数控火焰切割机,山西数控等离子切割机,辽宁便携式数控切割机,吉林数控火焰切割机,黑龙江数控等离子切割机,江苏数控切割机,浙江数控切割机,安徽数控切割机,福建切割机,江西切割机,山东数控切割机,台湾切割机,河南切割机,湖北数控切割机,湖南数控切割机,广东切割机,海南数控切割机,四川数控切割机,贵州数控切割机,云南切割机,陕西切割机,甘肃数控切割机,青海数控切割机,需要的朋友联系我们15254176866

电话咨询
邮件咨询
在线地图
QQ客服
网站地图