全国服务热线:

18396804865 钱经理

数控火焰切割机安全保障很重要的

2019-12-21 16:25:52文章来源:www.jnzrtcsk.com560

数控火焰切割机安全保障
Safety guarantee
1.设备周围应避免强震动源.
1. Strong vibration sources should be avoided around the equipment.
2.工作人员挂牌上岗操作,无关人员不得上机,更不准擅自按动键,以免损坏机器或程序,数据丢失.
2. Staff members should be listed for post operation, and no unrelated personnel should be allowed to go on the computer, let alone press the keys without authorization, in order to avoid damaging the machine or program and losing data.
3.移动设备时,应注意不允许发生脱钩或前冲,机上包括导轨任何一部分都不能撞击.
3. When mobile devices are used, attention should be paid to not allowing the occurrence of decoupling or forward impact. No part of the aircraft, including the guide rail, can be impacted.
4.设备动力源线应单独使用,并带有交流稳压装置.
4. The power source of the equipment should be used separately and equipped with AC voltage stabilizer.
5.通气或更换气体和清理割嘴必须按有关危险气体安全操作规程执行.
5. Ventilation or replacement of gases and cleaning of cutting nozzles must be carried out in accordance with the relevant safety operating procedures for hazardous gases.
6.操作者不得随意把外来程序调入机器内存内,以防病毒,只许用本厂认可专用软件.
6. Operators are not allowed to transfer foreign programs into machine memory at will in order to prevent virus. Only special software approved by our factory is allowed.
http://www.jnzrtcsk.com/
  济南卓然天成是大型数控火焰切割机厂家,数控等离子切割机厂家,便携式数控切割机厂家www.jnzrtcsk.com,供应河北数控火焰切割机,山西数控等离子切割机,辽宁便携式数控切割机,吉林数控火焰切割机,黑龙江数控等离子切割机,江苏数控切割机,浙江数控切割机,安徽数控切割机,福建切割机,江西切割机,山东数控切割机,台湾切割机,河南切割机,湖北数控切割机,湖南数控切割机,广东切割机,海南数控切割机,四川数控切割机,贵州数控切割机,云南切割机,陕西切割机,甘肃数控切割机,青海数控切割机,需要的朋友联系我们15254176866

电话咨询
邮件咨询
在线地图
QQ客服
网站地图