全国服务热线:

18396804865 钱经理

便携式数控切割机电流调节掌控要点

2019-10-14 16:59:30 文章来源:www.jnzrtcsk.com 339

便携式数控切割机:在正确使用进行高质量的快速切割的时候,必须对切割工艺参数进行深刻地理解和掌握,只有这样的情况下才能使等离子切割设备发挥其最大功效,其切割的工件也会达到最佳的效果,下面就为大家讲解一下等离子数控切割机在切割工件工作时机用等离子电源的切割电流调节参数,供广大用户参考学习.

Portable CNC Cutting Machine: In the correct use of high-quality fast cutting, we must have a profound understanding and mastery of cutting process parameters. Only in this case can plasma cutting equipment play its greatest role, and its cutting workpiece will achieve the best results. Here we will explain the CNC plasma cutting machine used in cutting workpiece and so on. The cutting current parameters of ion power supply can be used for reference and learning by users.

在等离子数控切割机切割工件时,关于机用等离子电源的切割电流调节问题至关重要,它是最重要的切割工艺参数,直接决定了切割的厚度和速度,即切割能力.关于造成的影响,直接表现为以下几点等离子数控切割机的切割电流的选择形式:

In the process of cutting workpiece by plasma numerical control cutting machine, the problem of cutting current regulation of plasma power supply is very important. It is the most important cutting process parameter, which directly determines the thickness and speed of cutting, i.e. cutting ability. As for the impact, it is directly shown in the following selection forms of cutting current of plasma numerical control cutting machine:

1、等离子数控切割机的切割电流的增大,等离子电弧能量增加,切割能力提高,切割速度是随之增大;

1. With the increase of cutting current, plasma arc energy and cutting ability, the cutting speed of plasma numerical control cutting machine increases.

2、等离子数控切割机的切割电流增大,等离子电弧直径增加,电弧变粗使得切口变宽;

2. The cutting current of plasma NC cutting machine increases, the diameter of plasma arc increases, and the arc becomes thicker, which makes the cut wider.

3、等离子数控切割机的切割电流过大使得喷嘴热负荷增大,喷嘴过早地损伤,切割质量自然也下降,甚至无法进行正常割.所以在切割前要根据材料的厚度正确选用切割电流和相应的喷嘴.

3. The excessive cutting current of plasma NC cutting machine makes the heat load of the nozzle increase, the nozzle damage prematurely, and the cutting quality naturally decreases, even the normal cutting can not be carried out. So before cutting, the cutting current and the corresponding nozzle should be selected correctly according to the thickness of the material.http://www.jnzrtcsk.com


  济南卓然天成是大型数控火焰切割机厂家,数控等离子切割机厂家,便携式数控切割机厂家www.jnzrtcsk.com,供应河北数控火焰切割机,山西数控等离子切割机,辽宁便携式数控切割机,吉林数控火焰切割机,黑龙江数控等离子切割机,江苏数控切割机,浙江数控切割机,安徽数控切割机,福建切割机,江西切割机,山东数控切割机,台湾切割机,河南切割机,湖北数控切割机,湖南数控切割机,广东切割机,海南数控切割机,四川数控切割机,贵州数控切割机,云南切割机,陕西切割机,甘肃数控切割机,青海数控切割机,需要的朋友联系我们15254176866

电话咨询
邮件咨询
在线地图
QQ客服
网站地图