全国服务热线:

18396804865 钱经理

便携式数控切割机切割长短和总宽

2019-12-02 09:47:52 文章来源:www.jnzrtcsk.com 354

便携式数控切割机是由数向y轴和横着X轴2个承重梁组成,y轴为主导梁,上边安装有服务器和平行线路轨,能够让服务器带上X轴在Y轴上前后左右挪动,进而产生激光切割的长短,在具体生产制造运用中y轴通常要以2米--6米中间。

Portable CNC cutting machine is composed of two load-bearing beams, i.e. Y-axis and X-axis. Y-axis is the main beam. Server and parallel track are installed on it. It can make X-axis move around and around Y-axis on the server, and then produce the length of laser cutting. In the specific production and application, Y-axis usually needs to be between 2 meters and 6 meters.

便携式数控切割机结构说明

Structure description of portable NC cutting machine

X轴与y轴成90度夹角,成显吊臂装作左右移动形成便携式数控切割机的切割宽度,从而与y轴形成一个切割面积,切割宽度越宽,在生产时候相对应用率会越高越便捷,切割在实际应用中x轴方向的切割宽度以1500mm--1600mm较多.

The X-axis and y-axis are 90 degrees inclined, and the display boom moves left and right to form the cutting width of portable NC cutting machine, thus forming a cutting area with y-axis. The wider the cutting width, the higher the relative application rate in production, the more convenient the cutting width in the x-axis direction is. In practical application, the cutting width in the x-axis direction is more than 1500mm-1600mm.

型号中暗藏的切割尺寸

Cutting Dimensions Hidden in Model

x轴的长度并非可以随意增加,因为当切割最大宽度的时候,设备x轴的伸缩臂出于最长距离,这样容易导致侧翻,所以每个数控切割设备厂家在设计生产便携式数控切割机的时候,一般都是在确保安全稳定的前提下,尽量追求切割宽度最大,从而实现在y轴一定的条件下,切割面积最大化.http://www.jnzrtcsk.com

The length of the x-axis can not be increased at will, because when cutting the maximum width, the telescopic arm of the x-axis of the equipment is out of the longest distance, which easily leads to rollover. Therefore, when designing and manufacturing portable numerical control cutting machine, every manufacturer of the numerical control cutting equipment generally pursues the maximum cutting width on the premise of ensuring safety and stability, so as to achieve cutting under certain conditions of the y-axis. Maximizing area. http://www.jnzrtcsk.com


  济南卓然天成是大型数控火焰切割机厂家,数控等离子切割机厂家,便携式数控切割机厂家www.jnzrtcsk.com,供应河北数控火焰切割机,山西数控等离子切割机,辽宁便携式数控切割机,吉林数控火焰切割机,黑龙江数控等离子切割机,江苏数控切割机,浙江数控切割机,安徽数控切割机,福建切割机,江西切割机,山东数控切割机,台湾切割机,河南切割机,湖北数控切割机,湖南数控切割机,广东切割机,海南数控切割机,四川数控切割机,贵州数控切割机,云南切割机,陕西切割机,甘肃数控切割机,青海数控切割机,需要的朋友联系我们15254176866

电话咨询
邮件咨询
在线地图
QQ客服
网站地图